-40%

Decal HONDA BF 9.9 Outboard Set of numbers Honda 9.9 Reproduction 1997-2002

$ 2.64

Availability: 15 in stock
  • Decal Type: Lettering
  • Returns Accepted: Returns Accepted
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Return shipping will be paid by: Seller
  • Manufacturer Part Number: Reproduction
  • Condition: New
  • Brand: ORACAL
  • Item must be returned within: 30 Days
  • Restocking Fee: No

    Description

    Decal Set of numbers HONDA BF 9.9
    For cowling 63100-ZV4-010ZB,
    63100-ZV4-020ZB
    1997-2002
    Stickers are not OEM parts, these are reproductions
    Stickers are produced on self-adhesive, transparent vinyl film with lamination.
    We use only high-quality films from well-known manufacturers.
    Stickers may differ slightly from the original in color, size, shape.
    Waterproof, frost-resistant and heat-resistant, petrol-resistant - (if not left for a long time in a petrol environment).
    Stickers adhere well to paint, varnish and other cleaned smooth surfaces.
    When painting the upper casing, you can stick the decal on the base paint and cover the decal with clear varnish along with the engine casing.
    Decals are resistant to ultraviolet light, but over the years, under the influence of sunlight, over time, everything fades and loses color, be it a sticker or paint, etc. But this will not happen in the early years.
    Instructions for correct gluing.
    1. Prepare a room with a temperature of +20 C and more.
    2. Water in a spray device, preferably
    distilled water about 300 grams, and add to it
    pure soap (no additives) a couple of drops, or very small
    piece of solid. Stir well.
    3. Prepare a special spatula to remove
    drops of water formed under the sticker.
    4. Clean wipes not leaving after
    yourself particles.
    5. Ethyl alcohol to remove fat content from
    surface.
    6. Accurately measure the place for sticking.
    7. Calculate the surface of the sticking place.
    8. Remove grease from the surface of the place of sticking clean
    napkin with ethyl alcohol.
    9. Remove the film from the back of the sticker, revealing
    sticky side.
    10. Apply water from both surfaces
    water sprayer. So that both
    the gluing sides were thoroughly wet.
    11. Glue the sticker on the surface you need,
    we fix the sticker, shifting in place, and squeeze out
    Accumulated drops of water with a spatula, removing drops
    water to the edge of the sticker.
    12. After you need to wait about 24 hours.
    Attention.
    No need to test for durability.
    For good bonding, 2-3 days are needed.
    Worldwide shipping.
    __________________________________________________________________________________________________________________________
    All products in our store are located in Ukraine in our warehouse.
    Please check your country's inbound mail rules and regulations before purchasing and inquire about taxable items.
    Thank you for your purchase and don't forget about reviews.