Decal Set HONDA BF 20 Outboard VINYL Kit Sticker Honda 20 four stroke Reproduct.

Description

VINYL Decal Set for HONDA BF20
Outboard
For top cowling 63100-ZY1-010ZA
This is not OEM decal - this is reproductions
Stickers are produced on self-adhesive, transparent vinyl film with lamination.
We use only high-quality films from well-known manufacturers.
Stickers may differ slightly from the original in color, size, shape.
Waterproof, frost-resistant and heat-resistant, petrol-resistant - (if not left for a long time in a petrol environment).
Stickers adhere well to paint, varnish and other cleaned smooth surfaces.
When painting the upper casing, you can stick the decal on the base paint and cover the decal with clear varnish along with the engine casing.
Decals are resistant to ultraviolet light, but over the years, under the influence of sunlight, over time, everything fades and loses color, be it a sticker or paint, etc. But this will not happen in the early years.
1
. - Great price.
2
. - Vinyl films from only the best manufacturers.
3
. - There is expedited delivery.
4
. - Possibility to supplement the complete set with stickers, plates on your engine, according to your photos and measurements. -
Free
of charge. (Send photos and measurements in a message to us).
5
. - You accidentally spoiled a part of the sticker, don't worry, we can send small parts to you
free
of charge, you pay only 8 $ shipping for standard delivery or in an envelope. Send us a photo of the damaged part.
6
. -
Didn't find the stickers you were looking for? Send us a message with a photo. If we do not have such decals, then we will ask you to measure parts of the stickers, according to old samples. We will make the kit for
free
, pay only for the delivery
8 $
.
7
. - Ability to change color, font, size of decals
.
Instructions for correct gluing.
1. Prepare a room with a temperature of +20 C and more.
2. Water in a spray device, preferably
distilled water about 300 grams, and add to it
pure soap (no additives) a couple of drops, or very small
piece of solid. Stir well.
3. Prepare a special spatula to remove
drops of water formed under the sticker.
4. Clean wipes not leaving after
yourself particles.
5. Ethyl alcohol to remove fat content from
surface.
6. Accurately measure the place for sticking.
7. Calculate the surface of the sticking place.
8. Remove grease from the surface of the place of sticking clean
napkin with ethyl alcohol.
9. Remove the film from the back of the sticker, revealing
sticky side.
10. Apply water from both surfaces
water sprayer. So that both
the gluing sides were thoroughly wet.
11. Glue the sticker on the surface you need,
we fix the sticker, shifting in place, and squeeze out
Accumulated drops of water with a spatula, removing drops
water to the edge of the sticker.
12. After you need to wait about 24 hours.
Attention.
No need to test for durability.
For good bonding, 2-3 days are needed.
Worldwide shipping.
__________________________________________________________________________________________________________________________
For expedited shipping, select expedited shipping when purchasing.
All products in our store are located in Ukraine in our warehouse.
Please check your country's inbound mail rules and regulations before purchasing and inquire about taxable items.
Thank you for your purchase and don't forget about reviews.